Articles by "Tutorial"
Showing posts with label Tutorial. Show all posts


Introduction:


The Nokia 6310 TA-1400 is a classic feature phone that has gained popularity due to its nostalgic design and reliable performance. If you own this Nokia phone that is locked on a password that you wish to factory reset, installing the Diag driver is essential. In this blog post, we will provide you with a comprehensive step-by-step guide to successfully install the Nokia 6310 TA-1400 Diag driver.

Before we begin, make sure you have the following prerequisites:


1. A Nokia 6310 TA-1400 device.

2. Original USB data cable.

3. A Windows PC (Windows 7,8,10 or higher).


Step 1: Downloading the Diag Driver:


1. Driver Link will be below this post.

2. Download the Driver File.

3. Drivers for Windows 7, windows 8/8.1, and Windows 10 or higher are all available in the Zip file.


Step 2: Extracting the Driver Package:


1. Locate the downloaded driver package on your PC.

2. Right-click on the file and use the unzipper of your choice to extract it.

3. Choose a suitable location to extract the files and click "Extract."

Step 3: Enabling Diag Mode on the Nokia 6310 TA-1400:


1. Power off your Nokia 6310 TA-1400 device.

2. Connect the USB Cable while the device is completely off. (Note: Don't press any boot key)

3. Two new hardware devices should show up in your device manager


Step 4: Open Device  Manager


Method 1: Using the Start Menu

Click on the Start menu button located at the bottom-left corner of the screen.

In the search bar, type "Device Manager" and press Enter.

The Device Manager window will open, displaying a list of installed devices on your computer.


Method 2: Using Computer Properties

Left-click on "Computer" or "This PC" and scroll down to Properties

In the Computer Properties section, you'll see Device Manager in related settings shown on sides of the page.


Step 5: Installing the Diag Driver:

Carefully watch the video for step by step guide.



Congratulations! You have successfully installed the Nokia 6310 TA-1400 Diag driver on your Windows PC. With the driver


DOWNLOAD DRIVER

Driver Name: Nokia 6310 TA-1400 Diag Driver

Size: 13.1 MB

Download Now


FACTORY RESET TOOL

Driver Name: [Ourshopfix.com]_SPD Diag Reset Tool V2_GautamGreatTool

Size: 1.46 MB

Download Now


Introduction:

The Z3x Pandora Box is a versatile tool that enables users to unlock the full potential of their mobile devices. With its extensive features, it has become popular among tech enthusiasts and professionals. This blog post offers a comprehensive guide on setting up the Z3x Pandora Box and explores how it enhances device experiences.

1. Understanding the Z3x Pandora Box:

The Z3x Pandora Box is a multifunctional tool that supports various smartphone models. It enables unlocking network restrictions, repairing IMEI, removing FRP locks, and more. With its user-friendly interface and regular software updates, the Z3x Pandora Box ensures users have access to the latest solutions for device customization and repair.


2. Setting up the Z3x Pandora Box:

Follow these steps for setting up the Z3x Pandora Box:


   a. Purchase an authentic Z3x Pandora Box from a trusted supplier.

   b. Install the necessary drivers and software provided by Z3x Team on your computer.

   c. Connect the Pandora Box to your computer using a USB cable.

   d. Launch the Z3x software and wait for the detection of the Pandora Box.

   e. Follow on-screen instructions to complete the setup process.

   f. Register and activate your Pandora Box with the required licenses for desired functionalities.


3. Exploring Z3x Pandora Box Features:

The Z3x Pandora Box offers various features to enhance device experiences:

   a. Device Unlocking: Overcome network restrictions and use your device with any carrier.

   b. IMEI Repair: Resolve IMEI-related issues for proper network connectivity.

   c. FRP Lock Removal: Bypass Factory Reset Protection (FRP) locks to regain device access.

   d. Firmware Flashing: Install custom firmware or update the device's software.

   e. Data Backup and Restore: Securely back up and restore important data.


4. Benefits of Z3x Pandora Box:

Utilizing the Z3x Pandora Box provides several advantages:


   a. Device Customization: Unlock your device's full potential by customizing features and settings.

   b. Device Repair: Resolve common issues like network problems and software glitches.

   c. Access to Exclusive Tools: Benefit from the comprehensive range of tools and solutions offered by Z3x Team.

   d. Regular Software Updates: Stay up-to-date with the latest features and improvements through regular updates.


PANDORA TOOL SETUP 5.3

Exciting news! We are delighted to introduce Pandora Box Tool version 5.3, showcasing a variety of thrilling enhancements and new features. This latest release aims to elevate user experience and offer extended support for smartphone unlocking and repair, making it even more comprehensive.

Changelog!!!

Pandora Box Tool What's news in version 5.3


- Added support reset Mi Acc for Xiaomi with EROFS (exclusive)

- Some fixes Xiaomi 

- Finally, the cause of the complete erasure of UFS on some Vivo was found and fixed

(bug in Vivo DA), so now the warning for "Unsafe operations" is disabled

- Added support in preloader mode Vivo based on MT6877 and MT6781 (exclusive)

- GUI: changed Settings Tab

- Fixed repair Celero 5G

- GUI: now copying English log only (automatic)


DOWNLOAD SETUP 5.3


Additionally, numerous Xiaomi device-related issues have been rectified in the update, ensuring a smoother and more seamless user experience with Pandora Box. These fixes greatly enhance the overall performance and stability when working with Xiaomi smartphones.


Moreover, the Pandora Box team has successfully identified and resolved a critical problem concerning complete UFS erasure on specific Vivo devices. This issue, caused by a bug in Vivo DA (Download Agent), has been effectively addressed and resolved. Consequently, the warning for "Unsafe operations" has been disabled, granting Vivo users a more secure and stress-free flashing experience.


Notably, Pandora Box 5.3 introduces support for Vivo devices based on MT6877 and MT6781 chipsets in preloader mode. This remarkable addition expands the range of Vivo devices compatible with Pandora Box and facilitates various operations with utmost ease.



Introduction:

Itel has gained popularity in the mobile device market for its affordable yet feature-rich smartphones. Among them is the Itel P662L P40 Easy Buy, which offers an attractive user experience at a budget-friendly price. However, some users may encounter Mobile Device Management (MDM) restrictions that limit device customization. In this blog post, we will explore the Itel P662L P40 Easy Buy and guide Pandora Box users on permanently removing MDM files to regain control over their devices.

What Is The Use Of MDM File?

MDM File is a modified type of file molded to remove remote security-triggered system app. The security-triggered app is just like a dead vaccine which becomes alive when triggered. That is the app used by any rental services. it is used by a phone or monetary renting company to sanction any client that fails to pay his/her dues.


1. Exploring the Itel P662L P40 Easy Buy:

The Itel P662L P40 Easy Buy is a budget-friendly smartphone that combines impressive specifications and features. With its large display, decent performance, and capable camera setup, it has garnered attention from many users. Nonetheless, some individuals who purchase the Itel P662L P40 may face MDM restrictions that restrict certain functionalities and customization options.


2. The Challenges of MDM Restrictions:

Mobile Device Management (MDM) is a security feature designed to allow organizations to manage and control devices remotely. While beneficial for businesses, it can pose challenges for individual users who desire personalization and the ability to install third-party applications. MDM restrictions may limit app installations, device setting modifications, and access to certain features.

3. Pandora Box and the MDM Permanent Remove File:

Pandora Box has established itself as a trusted provider of mobile device solutions, offering reliable services to bypass MDM restrictions on various smartphone models. For Itel P662L P40 users encountering MDM challenges, Pandora Box offers a permanent solution through an MDM remove file. This file empowers users to eliminate MDM restrictions and regain complete control over their devices.

When your Itel P662L P40 is been disabled by the security plugin app the device will be limited from almost 95% of its initial activities. a watermark note might pops up on the screen asking for payment see the pictures below

Infinix, Tecno, Itel
Nokia

Itel P662L P40 Easy Buy MDM Remove File For Pandora Link can be found below the Post


4. Steps to Permanently Remove MDM with Pandora Box:

Follow these general steps to permanently remove MDM restrictions on the Itel P662L P40 using Pandora Box:


   a. Obtain the MDM remove file for the Itel P662L P40 Easy Buy from the link below.

   b. Ensure your device has a full battery charge or is connected to a power source.

   c. prepare your Pandora box or digital license ready for work

   d. Original high-speed USB cable is recommended to work for your Itel P662L P40 device to prevent unnecessary errors.

   e. Launch the Pandora Box software on your computer and follow the below instructions.


NOTE: in some cases, it's recommended to first flash format device with a fresh PAC File

    i. Goto Format, Wipe Partitions, Untick all partitions, Select only Super then Wipe.

    ii. Goto Flash, Click Restore from backup and Select the Itel P662L P40 MDM file below.

   iii. Don't turn on the device yet, Goto Locks, Unlock Bootloader the wipe userdata

   iv. Wait for the process to complete, and once done, your Itel P662L P40 will boot up, then complete the setup, and that is all.

   v. Restart your device and verify that the Security plugin is gone and restrictions have been successfully removed.


FILE INFO 

SOLUTION: Itel P662L P40 Easy Buy MDM Pandora File 

Requirements: Pandora, Buy MDM File And Phone To Work ON

Status: Paid Solution

Buy Now

--------------------------------------------

Whatsapp Us

 

PLEASE CONTACT ONLY WHEN YOU'RE READY TO PAY


Conclusion:

The Itel P662L P40 Easy Buy could be removed when the device is format flashed alone, but MDM restrictions may is still active and will surely trigger a lock after few days. Fortunately, Pandora Box offers a reliable solution through its ability to unlock SPD bootloader and ability to erase a single partition and write a single portion, these features allow MDM remove files to be ported on Itel P662L P40 users to permanently remove these limitations and regain full control over their devices. Always follow the steps carefully and exercise caution not to make mistakes. Enjoy the freedom to personalize your Itel P662L P40 and make the most of its capabilities. 



Infinix X665E Hot 20i Easy Buy MDM Permanent Remove File for Cm2, Only CM2, and the MDM file will remove the MDM permanently without relocking, you can factory reset or update the device and will remain unlocked.


What Is The Use Of MDM File?

MDM File is a modified type of file molded to remove remote security-triggered system app. The security-triggered app is just like a dead vaccine which becomes alive when triggered. That is the app used by any rental services. it is used by a phone or monetary renting company to sanction any client that fails to pay his/her dues.

When your Infinix X665C Hot 20i is been disabled by the security plugin app the device will be limited from almost 95% of its initial activities. a watermark note might pops up on the screen asking for payment see the pictures below

Infinix, Tecno, Itel
Nokia

Infinix X665C Hot 20i Easy Buy MDM CM2 File Download


VIDEO TUTOR


FILE INFO 

SOLUTION: Infinix X665C Hot 20i Easy Buy MDM For CM2

Requirements: Pandora Or CM2, Buy MDM File And  Phone To Work ON

Status: Paid Solution


Buy Now


Whatsapp Us

PLEASE CONTACT ONLY WHEN YOU'RE READY TO PAY


It's no longer a story that almost all the MTK devices from August 2022 security have been updated to block preloader, which leads to Brom jump error and of course, prevents the device from being flashed with any box or dongle.

In today's post,  I'll be proving the Brom solution for Tecno Be8 Pop 6 Pro Test Point which will allow the device to be flashed with Cm2 dongle without any Error tested solution

The below image portrays the error you'll get if Brom blocked


To overcome this trouble, you need to lay your hands on the Tecno Be8 Pop 6 Pro Test Point Brom Jump. with the solution, you'll be able to flash the device with any flashing box or dongle of your choice.

ads here

Logs

BROM ERROR

BROM: BROM BL: 0xFF 0x03 

BROM: PRELOADER PORT

AGENT:0_base:BASE_v2112 | Manual: Disabled

AGENT: Look for suitable BootChain in DA... 

AGENT:MTK_AllInOne_DA.bin

AGENT: Found MT6761

AGENT: MTK_DOWNLOAD_AGENT

BROM: Sending 1st DA...

BROM: 0x00007024: DA SEND ERROR!

ERROR: SECURE BOOT: SELECTED DA IS NOT SUPPORTED IN THE CURRENT DEVICE STATE!

INFO: PRELOADER Level: CORRECT DA required: PL/PL_CRYPTO/SWSEC

 Error: Fail to init protocol

>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation! Reconnect Power/Cable!

In this post, I am going to provide the solution to bypass the Brom Jump solution for Tecno Be8 Pop 6 Pro Test Point but NOT FREE OF CHARGE.


My solution is already tested and 100% working so you have nothing to worry about.


PROOF OF THE SOLUTION BEFORE AND AFTER


BEFORE SOLUTION


AFTER THE SOLUTION



File information

After purchasing the solution, you'll have access to the pack including the steps to do it

File Name: Tecno Be8 Pop 6 Pro Test Point For Brom Jump

File Size: Less than 1MB

Status: Paid Solution

Buy Now


PLEASE CONTACT ONLY WHEN YOU'RE READY TO PAY

It's no longer a story that almost all the MTK devices from August 2022 security have been updated to block preloader, which leads to Brom jump error and of course, prevents the device from being flashed with any box or dongle.

In today's post,  I'll be proving the Brom solution for Tecno KF6i Test Point Spark 7 Test Point which will allow the device to be flashed with Cm2 dongle without any Error tested solution

The below image portrays the error you'll get if Brom blocked


To overcome this trouble, you need to lay your hands on the Tecno KF6i Test Point Spark 7 Test Point Brom Jump. with the solution, you'll be able to flash the device with any flashing box or dongle of your choice.

ads here

Logs

BROM ERROR

BROM: BROM BL: 0xFF 0x03 

BROM: PRELOADER PORT

AGENT:0_base:BASE_v2112 | Manual: Disabled

AGENT: Look for suitable BootChain in DA... 

AGENT:MTK_AllInOne_DA.bin

AGENT: Found MT6761

AGENT: MTK_DOWNLOAD_AGENT

BROM: Sending 1st DA...

BROM: 0x00007024: DA SEND ERROR!

ERROR: SECURE BOOT: SELECTED DA IS NOT SUPPORTED IN THE CURRENT DEVICE STATE!

INFO: PRELOADER Level: CORRECT DA required: PL/PL_CRYPTO/SWSEC

 Error: Fail to init protocol

>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation! Reconnect Power/Cable!

In this post, I am going to provide the solution to bypass the Brom Jump solution for Tecno KF6i Test Point Spark 7 Test Point but NOT FREE OF CHARGE.


My solution is already tested and 100% working so you have nothing to worry about.


PROOF OF THE SOLUTION BEFORE AND AFTER


BEFORE SOLUTION


AFTER THE SOLUTION



File information

After purchasing the solution, you'll have access to the pack including the steps to do it

File Name: Tecno KF6i Test Point Spark 7 Test Point For Brom Jump

File Size: Less than 1MB

Status: Paid Solution

Buy Now


PLEASE CONTACT ONLY WHEN YOU'RE READY TO PAY

It's no longer a story that almost all the MTK devices from August 2022 security have been updated to block preloader, which leads to Brom jump error and of course, prevents the device from being flashed with any box or dongle.

In today's post,  I'll be proving the Brom solution for Infinix X6819 Note 12i Test Point which will allow the device to be flashed with Cm2 dongle without any Error tested solution

The below image portrays the error you'll get if Brom blocked 


To overcome this trouble, you need to lay your hands on the Infinix X6819 Note 12i Test Point Brom Jump. with the solution, you'll be able to flash the device with any flashing box or dongle of your choice.


Logs

BROM ERROR

BROM: BROM BL: 0xFF 0x03 

BROM: PRELOADER PORT

AGENT:0_base:BASE_v2112 | Manual: Disabled

AGENT: Look for suitable BootChain in DA... 

AGENT:MTK_AllInOne_DA.bin

AGENT: Found MT6761

AGENT: MTK_DOWNLOAD_AGENT

BROM: Sending 1st DA...

BROM: 0x00007024: DA SEND ERROR!

ERROR: SECURE BOOT: SELECTED DA IS NOT SUPPORTED IN THE CURRENT DEVICE STATE!

INFO: PRELOADER Level: CORRECT DA required: PL/PL_CRYPTO/SWSEC


 Error: Fail to init protocol

>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation! Reconnect Power/Cable!


In this post, I am going to provide the solution to bypass the Brom Jump solution for Infinix X6819 Note 12i Test Point but NOT FREE OF CHARGE.



My solution is already tested and 100% working so you have nothing to worry about.


PROOF OF THE SOLUTION BEFORE AND AFTER


BEFORE SOLUTION


AFTER THE SOLUTION



File information

After purchasing the solution, you'll have access to the pack including the steps to do it

File Name: Infinix X6819 Note 12i Test Point For Brom Jump

File Size: Less than 1MB

Status: Paid Solution

Buy Now


PLEASE CONTACT ONLY WHEN YOU'RE READY TO PAY


X665B, KG5p And KG5q Board


It's no longer a story that almost all the MTK devices from August 2022 security have been updated to block preloader, which leads to Brom jump error and of course, prevents the device from being flashed with any box or dongle.

In today's post,  I'll be proving the Brom solution for Infinix X665B Hot 12i, Kg5p Spark 9 And Kg5q which will allow the device to be flashed with Cm2 dongle without any Error tested solution

The below image portrays the error you'll get if Brom blocked


To overcome the trouble you need to lay your hands on the Brom Jump solution. with the solution, you'll be able to flash the device with any flashing box or dongle of your choice.


Logs

 

BROM ERROR

BROM: BROM BL: 0xFF 0x03 

BROM: PRELOADER PORT

AGENT:0_base:BASE_v2112 | Manual: Disabled

AGENT: Look for suitable BootChain in DA... 

AGENT:MTK_AllInOne_DA.bin

AGENT: Found MT6761

AGENT: MTK_DOWNLOAD_AGENT

BROM: Sending 1st DA...

BROM: 0x00007024: DA SEND ERROR!

ERROR: SECURE BOOT: SELECTED DA IS NOT SUPPORTED IN THE CURRENT DEVICE STATE!

INFO: PRELOADER Level: CORRECT DA required: PL/PL_CRYPTO/SWSEC


 Error: Fail to init protocol


>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation! Reconnect Power/Cable!


In this post am going to provide the solution to bypass the Brom Jump solution for Infinix X665B Hot 12i, Kg5p Spark 9 And Kg5q but NOT FREE OF CHARGE.



My solution is already tested and 100% working so you have nothing to worry about.


PROOF OF THE SOLUTION BEFORE AND AFTER


BEFORE SOLUTION


AFTER THE SOLUTION


Confirmed by a Client On X665b 


File information

After purchasing the solution, you'll have access to the pack including the steps to do it


File Name: Infinix X665B Hot 12i, Kg5p Spark 9 And Kg5q Brom Jump solution

File Size: 1MB

Status: Paid Solution

Buy Now


PLEASE CONTACT ONLY WHEN YOU'RE READY TO PAY


It's no longer a story that almost all the MTK devices from August 2022 security have been updated to block preloader, which leads to Brom jump error and of course, prevents the device from being flashed with any box or dongle.

In today's post,  I'll be proving the Brom solution for Infinix X6817 Hot 12 which will allow the device to be flashed with Cm2 dongle without any Error tested solution

The below image portrays the error you'll get if Brom blocked


To overcome the trouble you need to lay your hands on the Brom Jump solution. with the solution, you'll be able to flash the device with any flashing box or dongle of your choice.


Logs

 

BROM ERROR

BROM: BROM BL: 0xFF 0x03 

BROM: PRELOADER PORT

AGENT:0_base:BASE_v2112 | Manual: Disabled

AGENT: Look for suitable BootChain in DA... 

AGENT:MTK_AllInOne_DA.bin

AGENT: Found MT6761

AGENT: MTK_DOWNLOAD_AGENT

BROM: Sending 1st DA...

BROM: 0x00007024: DA SEND ERROR!

ERROR: SECURE BOOT: SELECTED DA IS NOT SUPPORTED IN THE CURRENT DEVICE STATE!

INFO: PRELOADER Level: CORRECT DA required: PL/PL_CRYPTO/SWSEC


 Error: Fail to init protocol


>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation! Reconnect Power/Cable!


In this post am going to provide the solution to bypass the Brom Jump solution for Infinix X6817 Hot 12 but NOT FREE OF CHARGE.



My solution is already tested and 100% working so you have nothing to worry about.


PROOF OF THE SOLUTION BEFORE AND AFTER


BEFORE SOLUTION


AFTER THE SOLUTION


File information

After purchasing the solution, you'll have access to the pack including the steps to do it


File Name: Infinix Hot 12 X6817 Brom Jump solution

File Size: 2MB

Status: Paid Solution

Buy Now


PLEASE CONTACT ONLY WHEN YOU'RE READY TO PAY


It's no longer a story that almost all the MTK devices from August 2022 security have been updated to block preloader, which leads to Brom jump error and of course, prevents the device from being flashed with any box or dongle.

In today's post,  I'll be proving the Brom solution for Tecno Camon 19 CI6 which will allow the device to be flashed with Cm2 dongle without any Error tested solution

The below image portrays the error you'll get if Brom blocked


To overcome the trouble you need to lay your hands on the Brom Jump solution. with the solution, you'll be able to flash the device with any flashing box or dongle of your choice.


Logs

 

BROM ERROR

BROM: BROM BL: 0xFF 0x03 

BROM: PRELOADER PORT

AGENT:0_base:BASE_v2112 | Manual: Disabled

AGENT: Look for suitable BootChain in DA... 

AGENT:MTK_AllInOne_DA.bin

AGENT: Found MT6761

AGENT: MTK_DOWNLOAD_AGENT

BROM: Sending 1st DA...

BROM: 0x00007024: DA SEND ERROR!

ERROR: SECURE BOOT: SELECTED DA IS NOT SUPPORTED IN THE CURRENT DEVICE STATE!

INFO: PRELOADER Level: CORRECT DA required: PL/PL_CRYPTO/SWSEC


 Error: Fail to init protocol


>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation! Reconnect Power/Cable!


In this post am going to provide the solution to bypass the Brom Jump solution for Tecno Camon 19 CI6 but NOT FREE OF CHARGE.



My solution is already tested and 100% working so you have nothing to worry about.


PROOF OF THE SOLUTION BEFORE AND AFTER


BEFORE SOLUTION


AFTER THE SOLUTION


File information

After purchasing the solution, you'll have access to the pack including the steps to do it


File Name: Tecno Camon 19 Ci6 Brom Jump solution

File Size: 2MB

Status: Paid Solution

Buy Now


PLEASE CONTACT ONLY WHEN YOU'RE READY TO PAY


It's no longer a story that almost all the MTK devices from August 2022 security have been updated to block preloader, which leads to Brom jump error and of course, prevents the device from being flashed with any box or dongle.

In today's post,  I'll be proving the Brom solution for Tecno Spark 9T KH6 which will allow the device to be flashed with Cm2 dongle without any Error tested solution

The below image portrays the error you'll get if Brom blocked


To overcome the trouble you need to lay your hands on the Brom Jump solution. with the solution, you'll be able to flash the device with any flashing box or dongle of your choice.


Logs

 

BROM ERROR

BROM: BROM BL: 0xFF 0x03 

BROM: PRELOADER PORT

AGENT:0_base:BASE_v2112 | Manual: Disabled

AGENT: Look for suitable BootChain in DA... 

AGENT:MTK_AllInOne_DA.bin

AGENT: Found MT6761

AGENT: MTK_DOWNLOAD_AGENT

BROM: Sending 1st DA...

BROM: 0x00007024: DA SEND ERROR!

ERROR: SECURE BOOT: SELECTED DA IS NOT SUPPORTED IN THE CURRENT DEVICE STATE!

INFO: PRELOADER Level: CORRECT DA required: PL/PL_CRYPTO/SWSEC

 Error: Fail to init protocol

>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation! Reconnect Power/Cable!

In this post am going to provide the solution to bypass the Brom Jump solution for Tecno Spark 9T KH6 but NOT FREE OF CHARGE.

My solution is already tested and 100% working so you have nothing to worry about.


PROOF OF THE SOLUTION BEFORE AND AFTER


BEFORE SOLUTION


AFTER THE SOLUTION

File information

After purchasing the solution, you'll have access to the pack including the steps to do it


File Name: Tecno Kh6 Brom Jump solution

File Size: 2MB

Status: Paid Solution

Buy Now


PLEASE CONTACT ONLY WHEN YOU'RE READY TO PAY


 

Before anything, I'll like to make a declaimer, the act of removing an administrator App from any device automatically voids one's warranty and is also recognized as an illegal thing to do in other Countries. So, whatsoever you planned to do with the solution provided here is at your own risk and one should be held accountable for it than you.


Let's get down to business. 

Easy Buy And Palm Pay are Microfinance companies that lean money to people in need with commission attached, they also sell items on mortgages you pay in installments. this has been working over time.

How does it work for them to sell items in Installments to people they do not know or don't have an idea of where they exactly leave? Well, they have technology in place that was believed to be in charge of triggering a sanction by Blocking the Item from carrying out various activities. 



The same thing goes for phones on rentals, if you collect a phone on installment or borrow money using App and fail to pay it back as Agreed then the security put in place will be triggered and locked the phone automatically without any third-party interference.

Inbuild Security To Block Device 


Now That We Know How This Works, How Do We Get Rid Of It?

In This Post, I'll share with you the solution for permanent Easy buy removal for Infinix X652b  Hot 10i SPD.

For a long time now, the anti-relock solution for MTK Android 9,10, and 11 are available and has been working perfectly unlike the latest Spd like the Infinix X652b  Hot 10i SPD that relocks after few days. 

This Infinix X652b Hot 10i SPD solution will help to get rid of the security plugin itself, which we all know was the system App responsible for triggering the restrictions.

When I say permanent I mean gone and no relock later on the Infinix X652b  Hot 10i SPD. this solution is not like the earlier method that we just Flash format with Cm2 which will later relock in the future. this will permanently remove the Security Plugin from the device and this will keep the device away from remotely being disabled again.

Work Evidence 👇👇


File information

File Name: Infinix X652b Hot 10i Easy-Buy File

File Size: 1.7GB

DOWNLOAD


CONTACT ON WHATSAPP FOR A GUIDE AFTER FLASHING THE ABOVE FILE


Before anything, I'll like to make a declaimer, the act of removing an administrator App from any device automatically voids one's warranty and is also recognized as an illegal thing to do in other Countries. So, whatsoever you planned to do with the solution provided here is at your own risk and one should be held accountable for it than you.


Let's get down to business. 

Easy Buy, Pay Joy, D-Light, And Palm Pay are Microfinance companies that lean money to people in need with commission attached, they also sell items on mortgages you pay in installments. this has been working over time.

How does it work for them to sell items in Installments to people they do not know or don't have an idea of where they exactly leave? Well, they have technology in place that was believed to be in charge of triggering a sanction by Blocking the Item from carrying out various activities. 



The same thing goes for phones on rentals, if you collect a phone on installment or borrow money using App and fail to pay it back as Agreed then the security put in place will be triggered and locked the phone automatically without any third-party interference.

Inbuild Security To Block Device 


Now That We Know How This Works, How Do We Get Rid Of It?

In This Post, I'll share with you the solution for permanent Easy buy removal for the latest SPD devices like Infinix Smart 6 X6511b And Tecno Spark 8c KG5K.

For a long time now, the anti-relock solution for MTK Android 9,10, and 11 are available and has been working perfectly unlike the latest Spd that relocks after few days. 

This solution will help to get rid of the security plugin itself, which we all know was the system App responsible for triggering the restrictions.

When I say permanent I mean gone and no relock later. this solution is not like the earlier method that we just Flash format with Cm2 which will later relock in the future. this will permanently remove the Security Plugin from the device and this will keep the device away from remotely being disabled again.

Work Evidence 👇👇


File information

File Name: SPD Permanent Easy-Buy Solution Latest Security 2022

File Size: 8MB

CONTACT ON WHATSAPP FOR THE SOLUTION

(NOTE: Please Contact Only If Your Ready To Pay)


 


Am back again with another interesting solution on new MTK security Patch.

As you know mobile phone software Job is not for Dully engineers, if you're very active you should come across this problem in recent Mediatek devices like Error Tecno KG5J, KF7J, X665, X665b and many other devices that jump preloader and go direct to Brom which trigger an Error BROM : 0x00007024 : DA SEND ERROR

BROM ERROR


BROM: BROM BL: 0xFF 0x03 

BROM: PRELOADER PORT

AGENT:0_base:BASE_v2112 | Manual: Disabled

AGENT: Look for suitable BootChain in DA... 

AGENT:MTK_AllInOne_DA.bin

AGENT: Found MT6761

AGENT: MTK_DOWNLOAD_AGENT

BROM: Sending 1st DA...

BROM: 0x00007024: DA SEND ERROR!

ERROR: SECURE BOOT: SELECTED DA IS NOT SUPPORTED IN THE CURRENT DEVICE STATE!

INFO: PRELOADER Level: CORRECT DA required: PL/PL_CRYPTO/SWSEC

 Error: Fail to init protocol

>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation! Reconnect Power/Cable!


All methods avail even with the tools that are well known as the almighty of MTKs like Infinity Cm2 Dongle, Unlocktool and others Fail to read information from the device or even flash it.

In this post am going to provide the solution to bypass the Brom Jump solution but NOT FREE OF CHARGE.


My solution is already tested and 100% working so you have nothing to worry about.


PROOF OF THE SOLUTION BEFORE AND AFTER

BEFORE SOLUTION

AFTER THE SOLUTION



File information

After purchasing the solution, you'll have access to the pack including the steps to do it


File Name: New MTK Brom Jump solution

File Size: 5MB

Status: Paid Solution

Buy Now


PLEASE ONLY SEROUS ENGINEER SHOULD CONTACT FOR THE SOLUTION

 

Before anything, I'll like to make a declaimer, the act of removing an administrator App from any device automatically voids one's warranty and is also recognized as an illegal thing to do in other Countries. So, whatsoever you planned to do with the solution provided here is at your own risk and one should be held accountable for it than you.


Let's get down to business. 

Easy Buy And Palm Pay are Microfinance companies that lean money to people in need with commission attached, they also sell items on mortgages you pay in installments. this has been working over time.

How does it work for them to sell items in Installments to people they do not know or don't have an idea of where they exactly leave? Well, they have technology in place that was believed to be in charge of triggering a sanction by Blocking the Item from carrying out various activities. 



The same thing goes for phones on rentals, if you collect a phone on installment or borrow money using App and fail to pay it back as Agreed then the security put in place will be triggered and locked the phone automatically without any third-party interference.

Inbuild Security To Block Device 


Now That We Know How This Works, How Do We Get Rid Of It?

In This Post, I'll share with you the solution for permanent Easy buy removal for Tecno BD2P POP 5.

When I say permanent I mean gone and no relock later. this solution is not like the earlier method that we just Flash format with Cm2 which will later relock in the future. this will permanently remove the Security Plugin from the device and this will keep the device away from remotely being disabled again.

Work Evidence 👇👇


File information

File Name: Tecno BD2P POP 5 Easy-Buy File

File Size: 1.5GB

DOWNLOAD


CONTACT ON WHATSAPP FOR A GUIDE AFTER FLASHING THE ABOVE FILE