Learn how to install Nokia 6310 TA-1400 Diag driver with our step-by-step guide. Download link included!
Introduction:
The Nokia 6310 TA-1400 is a classic feature phone that has gained popularity due to its nostalgic design and reliable performance. If you own this Nokia phone that is locked on a password that you wish to factory reset, installing the Diag driver is essential. In this blog post, we will provide you with a comprehensive step-by-step guide to successfully install the Nokia 6310 TA-1400 Diag driver.
Before we begin, make sure you have the following prerequisites:
1. A Nokia 6310 TA-1400 device.
2. Original USB data cable.
3. A Windows PC (Windows 7,8,10 or higher).
Step 1: Downloading the Diag Driver:
1. Driver Link will be below this post.
2. Download the Driver File.
3. Drivers for Windows 7, windows 8/8.1, and Windows 10 or higher are all available in the Zip file.
Step 2: Extracting the Driver Package:
1. Locate the downloaded driver package on your PC.
2. Right-click on the file and use the unzipper of your choice to extract it.
3. Choose a suitable location to extract the files and click "Extract."
Step 3: Enabling Diag Mode on the Nokia 6310 TA-1400:
1. Power off your Nokia 6310 TA-1400 device.
2. Connect the USB Cable while the device is completely off. (Note: Don't press any boot key)
3. Two new hardware devices should show up in your device manager
Step 4: Open Device Manager
Method 1: Using the Start Menu
Click on the Start menu button located at the bottom-left corner of the screen.
In the search bar, type "Device Manager" and press Enter.
The Device Manager window will open, displaying a list of installed devices on your computer.
Method 2: Using Computer Properties
Left-click on "Computer" or "This PC" and scroll down to Properties
In the Computer Properties section, you'll see Device Manager in related settings shown on sides of the page.
Step 5: Installing the Diag Driver:
Carefully watch the video for step by step guide.
Congratulations! You have successfully installed the Nokia 6310 TA-1400 Diag driver on your Windows PC. With the driver
DOWNLOAD DRIVER
Driver Name: Nokia 6310 TA-1400 Diag Driver
Size: 13.1 MB
FACTORY RESET TOOL
Driver Name: [Ourshopfix.com]_SPD Diag Reset Tool V2_GautamGreatTool
Size: 1.46 MB
Post A Comment:
0 comments so far,add yours
Welcome to OurshopFix official blog, we are here to satisfy your need, feel free to report any broken link or leave your message for us, Best regards