Tecno Be8 Test Point Be8 Pop 6 ProBrom Jump Fail To Flash With Cm2 | BROM : 0x00007024 : DA SEND ERROR

In today's post, I'll be proving the Brom solution for Tecno Be8 Pop 6 Pro Test Point which will allow the device to be flashed with Cm2 dongle witho

It's no longer a story that almost all the MTK devices from August 2022 security have been updated to block preloader, which leads to Brom jump error and of course, prevents the device from being flashed with any box or dongle.

In today's post,  I'll be proving the Brom solution for Tecno Be8 Pop 6 Pro Test Point which will allow the device to be flashed with Cm2 dongle without any Error tested solution

The below image portrays the error you'll get if Brom blocked

To overcome this trouble, you need to lay your hands on the Tecno Be8 Pop 6 Pro Test Point Brom Jump. with the solution, you'll be able to flash the device with any flashing box or dongle of your choice.

ads here

Logs

BROM ERROR

BROM: BROM BL: 0xFF 0x03 

BROM: PRELOADER PORT

AGENT:0_base:BASE_v2112 | Manual: Disabled

AGENT: Look for suitable BootChain in DA... 

AGENT:MTK_AllInOne_DA.bin

AGENT: Found MT6761

AGENT: MTK_DOWNLOAD_AGENT

BROM: Sending 1st DA...

BROM: 0x00007024: DA SEND ERROR!

ERROR: SECURE BOOT: SELECTED DA IS NOT SUPPORTED IN THE CURRENT DEVICE STATE!

INFO: PRELOADER Level: CORRECT DA required: PL/PL_CRYPTO/SWSEC

 Error: Fail to init protocol

>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation! Reconnect Power/Cable!

In this post, I am going to provide the solution to bypass the Brom Jump solution for Tecno Be8 Pop 6 Pro Test Point but NOT FREE OF CHARGE.

My solution is already tested and 100% working so you have nothing to worry about.

PROOF OF THE SOLUTION BEFORE AND AFTER

BEFORE SOLUTION

AFTER THE SOLUTION

File information

After purchasing the solution, you'll have access to the pack including the steps to do it

File Name: Tecno Be8 Pop 6 Pro Test Point For Brom Jump

File Size: Less than 1MB

Status: Paid Solution

Buy Now

PLEASE CONTACT ONLY WHEN YOU'RE READY TO PAY