December 2022

Gionee F6L Qualcomm loader allows you to be able to flash firmware, Erase FRP, Readback firmware and do any other stuff with any Qualcomm flash tool.

We come to notice that the Gionee F6L Power has two different varies, the first one can be used with normal flash tools like NCK, UMT, Miracle Box, etc. while the other build refuses to connect with any tool unless you load a custom loader before the tool/box will be able to perform the task on the device


FILE INFORMATION

File Name: Gionee Gionee F6L

File Size: 

Download



Hi Dear Client!

In this post, I will be giving you access to download Infinix X6819 Note 12i Signed Firmware Flash File | Stock Rom Tested OK, Infinix X6819 Note 12i firmware or flash file, it can be used to fix most of the   Infinix X6819 Note 12i software-related issues. issues like; 

Infinix X6819 Note 12i continuously rebooting, 

Infinix X6819 Note 12i not turning On after flashing, 

Infinix X6819 Note 12i stock on red-state mode, 

Infinix X6819 Note 12i Stock on the fastboot screen,  

Infinix X6819 Note 12i failing to boot, 

Infinix X6819 Note 12i stocked in recovery mode, and so on...


About Infinix X6819 Note 12i

Preserve your memories in the best clarity ever with the Infinix X6819 Note 12i. Every image and video is crisp, bright, and sharp - just the way you remember it. Stay online and in touch with all the things that matter most to you with the 6.8 inches super full view screen.


Infinix Hot 12 Play

BODYDimensions164.8 x 76.4 x 8.8 mm (6.49 x 3.01 x 0.35 in)
Weight190 g (6.70 oz)
BuildGlass front, plastic back, plastic frame
SIMDual SIM (Nano-SIM, dual stand-by)
DISPLAYTypeIPS LCD, 480 nits
Size6.6 inches, 104.6 cm2 (~83.1% screen-to-body ratio)
Resolution720 x 1612 pixels, 20:9 ratio (~267 ppi density)
PLATFORMOSAndroid 11, XOS 7.6
ChipsetMediatek MT6761 Helio A22 (12 nm)
CPUQuad-core 2.0 GHz Cortex-A53
GPUPowerVR GE8320

Common Smartphones problems that can be fixed by Re-writing the firmware


* Virus issues

* Touchpad not working after flashing

* Dead Boot Repair

* Rebooting Issues

* Unlock issues ( FRP/PRIVACY)

* Hang On Logo

* LCD Blank,

* Camera Not Responding

* Unfortunately App Has Stopped

* Automatic Data/Wi-Fi On

*Unlock Network Lock

And much More...


FILE INFO...

FILENAME: [ourshopfix.com] X6819-H6920G-S-OP-220718V663

FILE SIZE: 3.7GB

PASSWORD: FREE No Password


For Complains, Broken links, or Bad File Please Let Us Know In The Comment Section or Whatsapp


NOTE; this file is only for Infinix I will be giving you access to download Infinix X6819 Note 12i Signed Firmware Flash File | Stock Rom Tested OK, Infinix X6819 Note 12i firmware or flash file do not flash on other devices AND make sure you're flashing the exact build for your device because flashing the wrong file can Brick your device. OURSHOPFIX is not responsible for any damages encountered


SUBSCRIBE TO OUR YOUTUBE CHANNEL HERE FOR FREE VIDEO TUTORS

                                     _____________________________________________ 




Hi Dear Client!

In this post, I will be giving you access to download Infinix X665B Hot 12i Signed Firmware Flash File | Stock Rom Tested OK, Infinix X665B Hot 12i firmware or flash file, it can be used to fix most of the   Infinix X665B Hot 12i software-related issues. issues like; 

Infinix X665B Hot 12i continuously rebooting, 

Infinix X665B Hot 12i not turning On after flashing, 

Infinix X665B Hot 12i stock on red-state mode, 

Infinix X665B Hot 12i Stock on the fastboot screen,  

Infinix X665B Hot 12i failing to boot, 

Infinix X665B Hot 12i stocked in recovery mode, and so on...


About X665B Hot 12i

Preserve your memories in the best clarity ever with the Infinix X665B Hot 12i. Every image and video is crisp, bright, and sharp - just the way you remember it. Stay online and in touch with all the things that matter most to you with the 6.8 inches super full-view screen.


Infinix Hot 12 Play

BODYDimensions164.8 x 76.4 x 8.8 mm (6.49 x 3.01 x 0.35 in)
Weight190 g (6.70 oz)
BuildGlass front, plastic back, plastic frame
SIMDual SIM (Nano-SIM, dual stand-by)
DISPLAYTypeIPS LCD, 480 nits
Size6.6 inches, 104.6 cm2 (~83.1% screen-to-body ratio)
Resolution720 x 1612 pixels, 20:9 ratio (~267 ppi density)
PLATFORMOSAndroid 11, XOS 7.6
ChipsetMediatek MT6761 Helio A22 (12 nm)
CPUQuad-core 2.0 GHz Cortex-A53
GPUPowerVR GE8320

Common Smartphones problems that can be fixed by Re-writing the firmware


* Virus issues

* Touchpad not working after flashing

* Dead Boot Repair

* Rebooting Issues

* Unlock issues ( FRP/PRIVACY)

* Hang On Logo

* LCD Blank,

* Camera Not Responding

* Unfortunately App Has Stopped

* Automatic Data/Wi-Fi On

*Unlock Network Lock

And much More...


FILE INFO...

FILENAME: [ourshopfix.com] X665B-H6222IJKL-R-OP-220720V500

FILE SIZE: 3.7GB

PASSWORD: FREE No Password


For Complains, Broken links, or Bad File Please Let Us Know In The Comment Section or Whatsapp


NOTE; this file is only for Infinix X6816C Hot 12 Play do not flash on other devices AND make sure you're flashing the exact build for your device because flashing the wrong file can Brick your device. OURSHOPFIX is not responsible for any damages encountered


SUBSCRIBE TO OUR YOUTUBE CHANNEL HERE FOR FREE VIDEO TUTORS

                                     _____________________________________________ 




It's no longer a story that almost all the MTK devices from August 2022 security have been updated to block preloader, which leads to Brom jump error and of course, prevents the device from being flashed with any box or dongle.

In today's post,  I'll be proving the Brom solution for Tecno Be8 Pop 6 Pro Test Point which will allow the device to be flashed with Cm2 dongle without any Error tested solution

The below image portrays the error you'll get if Brom blocked


To overcome this trouble, you need to lay your hands on the Tecno Be8 Pop 6 Pro Test Point Brom Jump. with the solution, you'll be able to flash the device with any flashing box or dongle of your choice.

ads here

Logs

BROM ERROR

BROM: BROM BL: 0xFF 0x03 

BROM: PRELOADER PORT

AGENT:0_base:BASE_v2112 | Manual: Disabled

AGENT: Look for suitable BootChain in DA... 

AGENT:MTK_AllInOne_DA.bin

AGENT: Found MT6761

AGENT: MTK_DOWNLOAD_AGENT

BROM: Sending 1st DA...

BROM: 0x00007024: DA SEND ERROR!

ERROR: SECURE BOOT: SELECTED DA IS NOT SUPPORTED IN THE CURRENT DEVICE STATE!

INFO: PRELOADER Level: CORRECT DA required: PL/PL_CRYPTO/SWSEC

 Error: Fail to init protocol

>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation! Reconnect Power/Cable!

In this post, I am going to provide the solution to bypass the Brom Jump solution for Tecno Be8 Pop 6 Pro Test Point but NOT FREE OF CHARGE.


My solution is already tested and 100% working so you have nothing to worry about.


PROOF OF THE SOLUTION BEFORE AND AFTER


BEFORE SOLUTION


AFTER THE SOLUTION



File information

After purchasing the solution, you'll have access to the pack including the steps to do it

File Name: Tecno Be8 Pop 6 Pro Test Point For Brom Jump

File Size: Less than 1MB

Status: Paid Solution

Buy Now


PLEASE CONTACT ONLY WHEN YOU'RE READY TO PAY

It's no longer a story that almost all the MTK devices from August 2022 security have been updated to block preloader, which leads to Brom jump error and of course, prevents the device from being flashed with any box or dongle.

In today's post,  I'll be proving the Brom solution for Tecno KF6i Test Point Spark 7 Test Point which will allow the device to be flashed with Cm2 dongle without any Error tested solution

The below image portrays the error you'll get if Brom blocked


To overcome this trouble, you need to lay your hands on the Tecno KF6i Test Point Spark 7 Test Point Brom Jump. with the solution, you'll be able to flash the device with any flashing box or dongle of your choice.

ads here

Logs

BROM ERROR

BROM: BROM BL: 0xFF 0x03 

BROM: PRELOADER PORT

AGENT:0_base:BASE_v2112 | Manual: Disabled

AGENT: Look for suitable BootChain in DA... 

AGENT:MTK_AllInOne_DA.bin

AGENT: Found MT6761

AGENT: MTK_DOWNLOAD_AGENT

BROM: Sending 1st DA...

BROM: 0x00007024: DA SEND ERROR!

ERROR: SECURE BOOT: SELECTED DA IS NOT SUPPORTED IN THE CURRENT DEVICE STATE!

INFO: PRELOADER Level: CORRECT DA required: PL/PL_CRYPTO/SWSEC

 Error: Fail to init protocol

>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation! Reconnect Power/Cable!

In this post, I am going to provide the solution to bypass the Brom Jump solution for Tecno KF6i Test Point Spark 7 Test Point but NOT FREE OF CHARGE.


My solution is already tested and 100% working so you have nothing to worry about.


PROOF OF THE SOLUTION BEFORE AND AFTER


BEFORE SOLUTION


AFTER THE SOLUTION



File information

After purchasing the solution, you'll have access to the pack including the steps to do it

File Name: Tecno KF6i Test Point Spark 7 Test Point For Brom Jump

File Size: Less than 1MB

Status: Paid Solution

Buy Now


PLEASE CONTACT ONLY WHEN YOU'RE READY TO PAY