Breaking

Post Top Ad

Your Ad Spot

Thursday, April 18, 2019

HOW TO FORCE GIONEE F6 TO EDL MODE (DOWNLOAD MODE) AND REMOVE FRP

As we all know Gionee F6 is a new Gionee smart phone powered by Qualcomm CPU. As a mobile Software engineer you should know about EDL or Download mode since most of the activities to be carried out on Qualcomm phone need does mode. EDL MODE: Devices with Qualcomm chipsets have a Primary Bootloader (PBL) which typically boots the Android system, but also houses an alternative boot mode known as EDL mode. EDL mode is Qualcomm’s Emergency Download Mode and allows an Original Equipment Manufacturer (OEM) to force flash software on a device. This cannot be modified (read-only mode) and has full control over the device’s storage. This simply means in order to write or Read On the Emmc you'll need to boot the phone to EDL mode. This post forcuses mainly on how to force Gionee F6 to EDL or Download.


 




      STEPS:

 * Get access to the inner part ( in this process you most dismantle the phone )

 * Locate two golden point ( See the Image above where *BOOT* is written beside it )

 * Make sure the device is completely Shutdown ( preferable disconnect the battery and connect again )

 * Plug USB cable ( let it show charging and the light turns off )

 * Then use picker to bridge the two golden point as shown in the Image above.

 * Press power button without releasing the picker until you see the port shown in the device manager.

Video description on how to do it is below;




Don't forget to like and Subscribe to Our YouTube Channel !

No comments:

Post a Comment

Welcome to OurshopFix official website, we are here to satisfy your need, feel free to contact us any time we will be ready to attend to you.

Post Top Ad

Your Ad Spot